November 17, 2026

Last updated:

November 17, 2026

Which BIM Software Exports Clean IFC to Consultants? Revit, Archicad and Snaptrude Compared

Altaf Ganihar
Founder and CEO

Table of Contents

The structural engineer opens your IFC file and the slabs are missing. The mechanical consultant finds every wall sitting four meters off the grid. Someone emails a screenshot, and your Friday plan disappears.

Nobody blames the file format in that moment. They blame the architect who sent it. That is why IFC export quality has become a procurement question, not just a technical footnote.

This guide compares Autodesk Revit, Graphisoft Archicad and Snaptrude on one job: handing models to outside consultants without rework. We cover certifications, model views, known weak spots and a test you can run yourself. We also say where our own product falls short.

The short answer: which tool exports cleanest?

All three tools can produce IFC that consultants open. None of them guarantees a clean result without setup and testing. The difference lies in how much control each gives you, how much each vendor documents, and where problems usually appear.

Revit offers highly configurable export controls, and its exporter is open source. Archicad has a long record in buildingSMART certification, including import and export of IFC2x3 Coordination View 2.0.

Snaptrude exports IFC natively with no plugin. It also offers a Revit round trip for teams that must deliver in Revit.

Platform Starting price Best for Key differentiator Free trial
Autodesk Revit About $3,012 to $3,030 per year Teams that need deep export configuration Open-source exporter with customizable export setups 30-day trial
Graphisoft Archicad About $2,414 to $2,840 per year Firms built around openBIM workflows Certified IFC import and export, with IFC translators 30-day trial
Snaptrude Free; Pro: $50/month ($600 billed annually); Max: $100/seat/month ($1,200 per seat billed annually) Teams that move from early design to consultant coordination Native IFC export with no plugin, plus Revit round trip Free plan with 3 projects

Prices are list prices from vendor pages and Snaptrude's comparison pages in October 2027. Confirm Archicad pricing with Graphisoft before you budget. Snaptrude's pricing page remains the source of truth for its plans.

What "clean" IFC actually means to a consultant

A clean file is not one that merely opens. A clean file lets the engineer do their job without asking you to fix it. That means the right elements, in the right place, with the properties their software expects.

Four things decide that. Geometry must arrive intact, and elements must carry the correct IFC class, so a slab is not a generic proxy.

Properties and classifications must be present and named as agreed. Coordinates and levels must match the project datum.

The standards body helps here. buildingSMART runs a software certification program that tests whether tools implement IFC correctly. It covers IFC2x3 Coordination View 2.0 for export and import, plus IFC4 views for reference and design transfer.

Certification has limits. Neither the IFC2x3 nor the IFC4 views cover round trips of data back into the source tool.

So a certified export tells you the file follows the rules. It does not tell you a consultant's markup will survive a second transfer.

Requirements matter as much as software. buildingSMART's Information Delivery Specification lets a client define needed properties, materials and classifications in a machine-readable file. It cannot yet describe geometry, so those checks stay manual.

Snaptrude's guide to BIM model exchange requirements makes the same point. Define what the receiver must do before you pick a format.

1. Autodesk Revit: The most configurable exporter

Revit is the BIM default, and consultants know its output. Few structural or MEP teams are seeing a Revit IFC for the first time. That familiarity counts for something when a deadline is close.

What the IFC export offers

Revit's IFC exporter is open source. Autodesk released it in 2011 under an LGPL license, so teams and vendors can inspect and extend it. Autodesk's developer blog said the move gave customers "greater flexibility" over IFC output, such as custom property sets and quantities.

In practice, the exporter works through export setups. You choose a schema, map Revit categories to IFC classes, and decide which parameters become property sets. Teams that invest in a tuned setup can match a client's requirements closely.

Autodesk also announced in 2020 that buildingSMART had certified Revit's IFC4 Reference View export for architecture and structure. MEP export was named as the next target. That is a useful marker, though it covers export only.

Where exports need attention

Configurability cuts both ways. A default export setup rarely matches a specific consultant's brief. Category mapping, shared coordinates and parameter sets all need a decision, and someone must own those decisions.

Two issues appear when setup is loose. Custom families can export as generic proxies when mapping is missing.

Models that treat project base points and shared coordinates casually can arrive displaced. Neither problem is unique to Revit, but its flexibility makes both easy to create.

Revit also runs only on Windows, and files lock to a software version. A Revit 2024 file will not open in Revit 2023, so teams upgrade in lockstep. Consultants who receive IFC avoid that problem, but your own team does not.

Pricing

Standalone Revit lists at roughly $3,012 to $3,030 per year, according to Autodesk. The AEC Collection costs $3,675 per year. Both are subscription-only, with no perpetual option.

Who relies on it

Revit is the documentation default for large, long-running projects. It has the deepest documentation engine in AEC and fabrication-level detail up to LOD 400 and beyond. For firms whose consultants all work in Autodesk tools, native exchange often beats IFC entirely.

2. Graphisoft Archicad: The openBIM specialist

Archicad has built its identity around open standards. Its architect-first workflow and its IFC tools appeal to firms that coordinate with consultants on mixed software. For many of them, IFC is the main exchange format, not a fallback.

What the IFC export offers

Graphisoft's help pages list several model view definitions. Archicad is certified for IFC2x3 Coordination View 2.0, for both import and export. It also supports the IFC4 Reference View for reference-model workflows, mostly one-way.

buildingSMART certified Archicad's IFC4 Reference View export in June 2019. Graphisoft was the only vendor named in that announcement. The program gave clients a way to specify certified software in contracts without tying a project to one platform.

Archicad uses IFC translators and an IFC manager to map elements and properties. You can save translator settings and reuse them across projects. That repeatability is valuable when a client issues the same requirements to every design team.

Where exports need attention

Graphisoft is clear about one limit. The IFC4 Design Transfer View lets you edit interconnected elements, but it does not support round-trip exchange. Not all applications support IFC4, so confirm what the receiver can open before choosing an IFC4 view.

Archicad is also a desktop product with its own learning curve. Firms that switch from Revit must rebuild templates and mapping. The effort is real, so plan for it before a live project depends on the new setup.

Graphisoft's BIMcloud supports co-authoring across locations. It uses file-based send and receive, so each architect works on reserved elements. Teams that expect fully live multi-user editing should test it against their habits.

Pricing

Snaptrude's comparison page lists Archicad Studio at about $2,414 per year and Collaborate at about $2,840. Graphisoft ended perpetual licensing in 2025, so the product is now subscription-only. Verify the current figure with Graphisoft before quoting it.

Who relies on it

Archicad suits architect-led practices that prefer openBIM and a cleaner interface. Long-time users often carry GDL libraries, templates and project archives refined over two decades. That accumulated firm knowledge is a real reason to stay.

3. Snaptrude: Native IFC with a Revit round trip

Disclosure: Snaptrude is our product, so we are not neutral judges here. We have tried to hold it to the same evidence standard as the other two tools.

Snaptrude is the design OS for the AEC industry, where humans and AI collaborate on a real geometric model. Teams can start from a blank site, a massing study or an existing BIM model. They can then carry that one model toward constructability documents.

That scope matters for IFC. Many consultant handoffs fail because a model is rebuilt between phases, and every rebuild adds a chance for error. Keeping one model reduces avoided rework before the file ever leaves your office.

What the IFC export offers

Snaptrude's comparison pages state that IFC export is native, with no plugin. They list IFC2x3 and IFC4, writing IFC4 as "2x4".

The vendor says exports pass structural-consultant review. Treat that as a claim to test, not a guarantee.

Snaptrude's own guidance supports that caution. Its article on model exchange says that "format support alone is not a universal fidelity guarantee." It tells teams to test a representative model in the destination application and record any exceptions.

For firms that must deliver in Revit, the Revit interoperability page describes a second path. Snaptrude imports .rvt files up to 150MB in the browser. On export, materials and custom parameters carry across through the Snaptrude Manager plugin, so the Revit team keeps its pipeline.

The model is parametric underneath, not a surface mesh. That means walls, floors and beams can remain editable objects when they reach Revit. It also gives IFC classes a better starting point than flat geometry would.

Where exports need attention

Snaptrude is strongest from site through schematic design and early BIM. Revit remains the deeper documentation engine, with LOD 400+ fabrication detail and mature family libraries. Many teams use Snaptrude for early design and keep Revit for final construction documents.

Snaptrude also does not run energy, carbon, CFD wind or noise analysis. It offers sun hours, shadow and illuminance only. If your consultants expect analysis-ready models for those studies, plan another route.

As a browser-based tool, it carries its own habits. Teams that rely on heavily customized desktop export setups should compare mapping options early. A pilot on one real project will reveal gaps that a feature list hides.

Pricing

Snaptrude's plans are Free at $0, Pro at $50 per month, and Max at $100 per month billed annually. Enterprise is custom and adds SSO, SAML, MFA, directory sync and open API access. Check snaptrude.com/pricing for current terms, because credit-based pricing is coming.

Who relies on it

Named customers include Studio+, Dekker, Cucor Consulting, SF Architect and GNA. A Dekker architect said that "Snaptrude filled a gap that we had, in our Design process." Studio+ said it delivered "an experience we hadn't been able to offer before."

Snaptrude maintains a dedicated trust and compliance center, available on request. It holds SOC 2 Type II compliance, which matters when consultants send security questionnaires with their model requests.

Five failures to look for in any IFC export

Whichever tool you choose, the same problems tend to appear. Knowing them in advance turns a vague test into a checklist your consultants can follow.

Missing or generic elements. A wall, slab or column arrives as a generic proxy because its category was never mapped. The consultant sees geometry but cannot filter or analyze it by type.

Displaced models. Coordinates drift when project origins differ between the source model and the consultant's federated model. Check one distinctive point, such as a grid intersection, in the receiving software.

Wrong level assignments. Elements land on the wrong storey, or a stair spans two levels without a clear host. Engineers then miscount loads or quantities by floor.

Thin property data. The file has the right classes but few of the properties the consultant needs. Fire ratings, materials and room names are common gaps.

Lost detail on the way back. The model survives the first handoff, then the consultant's markup breaks identity or host relationships on return. Round trips need their own test, because certification does not cover them.

Each failure has a different owner. Mapping belongs to the BIM manager, coordinates to the project lead, and property schedules to whoever wrote the information requirements. Name those people before the first export, not after the first complaint.

How to test IFC export before you commit

Marketing pages cannot tell you how your consultants' software will react. Your own model can. The test below takes a few hours and saves weeks of dispute later.

Pick one real project slice, not a clean sample. Include custom families, sloped slabs, curtain walls and at least one room with data attached. Export it from each tool you are considering, using the same schema.

Send the files to two consultants who use different software. Ask each to open the model, check classes and properties, and report what they had to fix. Record every exception with an owner.

Then run the workflow backwards.

Ask a consultant to return a marked-up model, and see what survives the second transfer. Snaptrude's interoperability testing checklist suggests scoring geometry, properties, views and round trips separately. One strong result then cannot hide a serious failure.

Agree the test criteria with each consultant before you export. A structural engineer may care most about slab thickness and level assignment. A mechanical engineer may care about spaces, rooms and clear ceiling heights.

Write those priorities down as a short acceptance list. It keeps the review objective and stops disputes about what "clean" means after the fact. It also makes your next project easier, because the list becomes a reusable standard.

Finally, decide what counts as accepted. A useful scale has three outcomes: accepted, accepted with assigned exceptions, and rejected for the stated purpose. That gives your BIM manager a record to defend.

Frequently asked questions

Is IFC export from Revit, Archicad or Snaptrude good enough for structural engineers?

It can be, if the export setup matches the engineer's software and brief. Structural teams usually need clean geometry, correct element classes and level assignments. Ask them which IFC schema and model view they prefer, then export to that.

Does buildingSMART certification guarantee a clean file?

No. Certification shows that software implements specific IFC views correctly under test conditions. Your own model, mapping and coordinates still decide the outcome. Certification also does not cover round trips, so test those separately.

Should we use IFC2x3 or IFC4?

Use the version your receivers support. IFC2x3 Coordination View 2.0 remains widely accepted for coordination. IFC4 offers richer data, but Graphisoft notes that not every application supports it, so confirm first.

Can Snaptrude replace Revit for consultant handoffs?

For some teams, yes. Others will keep Revit for documentation and use Snaptrude's Revit export for the handoff. The right answer depends on your consultants' tools and how deep your documentation must go.

What is the cheapest way to test all three?

Snaptrude has a free plan, and both Revit and Archicad offer 30-day trials. Use one real project slice across all three. Treat price as a closing factor, because a rejected consultant model costs more than a license.

Who should own IFC quality inside the firm?

A named BIM manager or design technology lead should own it. They should define export setups, run acceptance tests and record exceptions. Without a single owner, every project invents its own rules.

Conclusion: Pick the tool that matches your consultants

Choose Revit if your team already lives in it and your consultants accept its output. Invest in a tuned export setup, and give one person ownership. The control is excellent, but it demands discipline.

Choose Archicad if openBIM is central to your practice and you coordinate with mixed software. Its certification record and translators suit that style. Confirm IFC4 support on the receiving end before you rely on it.

Choose Snaptrude if you want one model from early design through consultant coordination.

The Revit round trip acts as your safety net. Test its IFC on a real project slice, as you would with any tool. It supports the architect's judgment and authorship, and it leaves the seal where it belongs.

Want to see how your own consultant model behaves? Book a Snaptrude demo and bring a real project slice. We will walk through the export together and flag anything that needs work.

‍

Snaptrude Logo

Design better buildings together

Start designing with Snaptrude - faster, BIM-ready, and built for real-time collaboration.

Try Snaptrude